GOKU SSJ HQS DIORAMAX
BY TSUME
ASSEMBLY INSTRUCTIONS
Version Standard
PLEASE DO NOT ASSEMBLE YOUR COLLECTIBLE STATUE IMMEDIATELY AFTER RECEIVING IT
Allow the resin to warm to room temperature for at least 48 hours to avoid any risk
of breakage.
To remove the base, first grasp it through the gap at the back of the polyfoam, inserting your hand through it. This is to avoid any risk of injury from the base's effects.
PREFERABLY WEAR LATEX GLOVES TO HANDLE YOUR STATUE.
You can build your statue alone
BOX 1
BOX 2
FLOOR 1
BOX 2
FLOOR 2
Please wait at least 48 hours after receiving your statue to proceed with its assembly
1. Place the base (1).
2. Insert the rock chip (25) into the designated location.
3. Insert the rock chip (27) into the designated location.
4. Insert the rock chip (26) into the designated location.
5. Insert the rock chip (24) into the designated location.
6. Insert the energy effect (20) into the slot provided.
7. Insert the energy effect (13) into the slot provided..
8. Insert the energy effect (17) into the slot provided.
9. Insert the energy effect (15) into the slot provided.
10. Insert the energy effect (18) into the slot provided..
11. Insert the energy effect (9) into the slot provided.
12. Insert the rod supporting the lightning (23)
For the alternative version without the lightning bolt, skip to step 12'.
12'. For the alternative version without the lightning, insert the effect (5) into the base.
13. Insert the lightning bolt (33).
14.Insert the effect (29) into the provided slot.
15. IInsert the effect (28) into the provided slot.
16. Insert the effect (38) into the provided slot.
17. Insert the effect (31) into the provided slot.
18. Insert the effect (35) into the provided slot.
19. Insert the effect (37) into the provided slot.
20. Insert the effect (29) into the provided slot.
21. Insert the effect (28) into the provided slot..
22. Insert the effect (38) into the provided slot.
23. Insert the effect (30) into the provided slot.
24. Insert the effect (32) into the provided slot.
25.Insert the effect (34) into the provided slot.
26. Insert the effect (34) into the provided slot.
27. Insert the effect (36) into the provided slot.
28. Insert the rock (6) into the designated location.
29. Insert the rock (2) into the designated location.
30. Insert the rock (7) into the designated location.
31. Insert the rock (10) into the designated location.
32. Insert the rock (3) into the designated location.
33. Insert the rock (4) into the designated location.
34. Insert Goku's body (14) into the slot provided.révu.
35. Insert the head (11) onto Goku's body.
36. Insert the belt (12) on Goku.
37. Place the additional base (16).
38. Insert Goku's body (14') on the additional base.
39. Insert the head (11) onto Goku's body. (Alternative on step 40).
40. Insert the head (8) onto Goku's body.
41. Insert the belt (21) on Goku.
42. Insert the logo (22) into the provided location.
43. Insert the logo (19) into the provided location.
Enjoy your statue