PLEASE DO NOT ASSEMBLE YOUR COLLECTIBLE STATUE IMMEDIATELY AFTER RECEIVING IT
请勿在收到收藏雕像后立即进行组装

Allow the resin to warm to room temperature for at least 24 hours to avoid any risk of breakage.
为避免任何破损风险，请让树脂在室温下至少放置24小时，使其回温

PREFERABLY WEAR LATEX GLOVES TO HANDLE YOUR STATUE.
You can build your statue alone.
建议佩戴乳胶手套来操作您的雕像
您可以独自完成雕像的组装

Floor 1

LID

⚠️   Please note that this piece is located in the lower part of the 2nd floor.
请注意，此零件位于第二层的下部位置

1.Remove the base (1) from the polyfoam.
从泡沫包装中取出底座（1） 

1. Insert Turbo Granny (2) onto the base (1).
将涡轮奶奶（2）安装到底座（1）上

2. Insert the brick (3) onto the base (1).
将砖块（3）安装到底座（1）上

3. Insert the effect (4) into the base.
将特效件（4）插入底座

4. Insert the effect (5) into Turbo Granny.
将特效件（5）插入涡轮奶奶

5. Insert the main body (6) into the base.
将主体（6）插入底座

6. Insert the warning sign base (7) into the base. 
将警示牌底座（7）插入底座

7. Insert the smartphone (8) onto the base.
将智能手机（8）安装到底座上

9 Insérez la plaque d'avertissement (9) dans la base (1).

9. Insert the left hand (10) into the body.
将左手（10）插入主体

10. Insert the right hand (11) in the body.
将右手(11)插入主体

11. Insert the head (12) in the body.
将头部（12）插入主体

OKARUN IKIGAI BY TSUME