APHRODITE HQS BY TSUME
ASSEMBLY INSTRUCTIONS
PLEASE DO NOT ASSEMBLE YOUR COLLECTIBLE STATUE IMMEDIATELY AFTER RECEIVING IT
Allow the resin to warm to room temperature for at least 24 hours to avoid any risk of breakage.
PREFERABLY WEAR LATEX GLOVES TO HANDLE YOUR STATUE.
You can build your statue alone.
Floor 1
Floor 2
Please wait at least 24 hours after receiving your statue to proceed with its assembly.
1. Place the base (1).
2. Insert the pillar (12) into the base.
3. Insert the pillar (2) into the base.
4. Insert the effect (25) into the base.
5. Insert the roses (3) into the base.
6. Insert the roses (10) into the base.
7. Insert the roses (18) into the base.
8. Insert the roses (15) into the base.
9. Insert the roses (4) into the base.
10. Insert the effect (24) into the base.
11. Insert the effect (27) into the base.
12. Insert the roses (7) into the base.
13. Insert the roses (6) into the base.
14. Insert the roses (20) on the 10 designated spots (see details below)
15. Insert the body (26) on the base.
16. Insert the cape (23) on the body.
⚠️ Insert carefully, take care with the 2 pillars.
17. Insert the left shoulder pad (9) on the body.
18. Insert the right shoulder pad (19) on the body.
19. Insert the head (22) on the body.
20. Insert the left arm (17). For the alternative left arm, see step 20*.
20*. Insert the alternative arm (13).
21. Insert the right arm (14). For the alternative right arm, see step 21*.
⚠️ Insert carefully so as not to scratch the cape.
21*. Insert the alternative right arm (8).
⚠️ Take care to avoid scratching the cape.
22. Insert the rose (11) under the two fingers. For the white or black rose, see steps 22* and 22**.
22*. Insert the white rose (16) under the fingers.
22**. Insert the black rose (5) under the fingers.
23. Insert the plate (21) on the base.
