THE JOKER DIORAMAX
BY TSUME
ASSEMBLY INSTRUCTIONS
DELUXE EDITION
ASSEMBLY INSTRUCTIONS
PLEASE DO NOT ASSEMBLE YOUR COLLECTIBLE STATUE IMMEDIATELY AFTER RECEIVING IT
Allow the resin to warm to room temperature for at least 24 hours to avoid any risk
of breakage.
PREFERABLY WEAR LATEX GLOVES TO HANDLE YOUR STATUE.
You can build yur statue alone.
BOX 1 - FLOOR 1
BOX 1 - FLOOR 2
BOX 1 - FLOOR 3
BOX 2
Please wait at least 24 hours after receiving your statue to proceed with its assembly.
1. Place the base (1).
2. Insert the digital wall (35) onto the base. Don't forget to insert the battery.
3. Insert the other wall (36) onto the base.
4. Slide the door (2) between the two walls. You can insert it in either direction.
5. Insert the elements (3 and 3') into the top of the wall.
6. Insert the portal (27)
7. Insert the megaphone (16) on the top of the wall
8. Insert the batteries into the spotlight (22).
9. Insert the spotlight (22) into the top of the wall. Make sure to hook the cables into the pipe on the back.
10. Insert the camera (23) into the wall.
11. Insert the body (34) into the wall.
12. Insert the right arm (31) into the body on the wall.
13. Insert the left arm (30) into the body.
14. Insert the head (8) into the body.
15. Insert the left arm (28) into the body on the ground.
16. Insert the left arm (28) into the body on the ground.
17. Insert the head (11) into the body on the ground.
18. Insert the small smoke cloud (9) on the ground.
19. Insert the smoke cloud (10) into the ground as well as on the back of the ground guard.
20. Insert the danger sign (33) onto the fence. You can position it on the right or left fence.
21. Insert the gas bottle (17) onto the bag on the ground.
22. Insert the gas bottle (19) on the ground.
23. Insert the gas bottle (18) onto the bag on the ground.
24. Insert the gas bottle bag (24) on the ground.
25. Insert the head (7) onto the body of the guard (29).
26. Insert the smoke (5) into the back of the guard (29).
27. Insert the other part of smoke (12) on top of the previous smoke (5).
28. Insert the guard body (29) into the base and into the smoke on the ground of the base.
29. Insert the hyena (38).
30. Insert the second hyena (41).
31. Insert the Joker's body (40) on the smoke
32. Insert the Joker's head (39) into his body.
33. Insert the Joker's left hand (47).
34. Insert the hand holding the cables (48) into the Joker's body.
Caution: Feel free to heat the cords beforehand for greater flexibility and to prevent breakage.
35. Insert the bar (15) between the two grids. For added security, screw it in place using the screwdriver (21).
36. Insert the ribbons onto the balloons (48).
37. Insert the strings (20) into the balloon (32).
38. Insert the ribbons onto the balloons (45).
39. Insert the balloon (44) onto the bar.
40. Insert the strings (20) into the balloon (32).
41. Insert the barbed wire (37) onto the mesh
42. Insert the last element (6).
Enjoy your statue